Showing posts with label Label Me Lovely punch. Show all posts
Showing posts with label Label Me Lovely punch. Show all posts

Sunday, March 15, 2020

Flowering Foil Card with Fun Folds

Today I challenged myself to design some cards using the Flowering foil DSP, a new second release SAB offering , free with a $60 purchase.

I had not been feeling well since a minor surgical procedure a couple of days ago.  Yesterday I felt well enough to colour some of the flowers on one of the 12 by 12 sheets.  Some  I  coloured  with Stampin' Blends, others were coloured with ink and  an aqua painter.  I must admit I prefer the ones coloured with the aqua painter.

After coloring them, both the single and double flowers were fussy cut.  Because the DSP is a bit flimsy I reinforced them by adding some punched card stock on the back before I added them to a card.

Here's the 3 cards I made


Card #1 Frame Card:

  


The base for this card is Thick Whisper White, layered with Whisper White embossed with the Layered Leaf embossing folder.  A frame made by die cutting 2 different sizes of the Stitched Rectangle dies, was added to the embossed layer using dimensionals.

A fussy cut flower which was coloured with ink and an aqua painter was adhered , with dimentionals, to the top left corner of the inside embossed layer slightly overlapping the frame.

Some dazzling diamonds was added to the center of the flower.

The sentiment, stamped with Rich Razzelberry ink, was punched with the  Pretty Label  punch. and adhered to a  piece of copper foil punched with the Label Me Lovely Punch with dimensionals.  Using the Detailed Trio Punch, notches were punched at both ends of this Pretty Label punchie so a piece of 1/4" metallic edged Rich Razzelberry ribbon could be added to the card front. This sentiment unit was added to the card front using dimensionals.

Stamp:  Tags in Bloom (SAB)
Inks:  Rich Razzelberry, Daffodil Delight, Old Olive
Papers:  Whisper White, Thick Whisper White, Flowering Foil DSP, Copper Foil
Accessories:  Aqua painter,  Stitched Rectangle dies, Layering Leaves Embossing Folder, `1/4" Metallic edged Rich Razzelberry ribbon, Dimensionals, Dazzling Diamonds, Detailed Trio Punch, Label Me Lovely Punch, Pretty Label Punch

Card #2  Wallet Card 


I call this card fold a wallet card  or a gift card holder card. The top half of the card folds down over a bottom fold which is made into a pocket which contains a pull out greeting card. The top flap is kept closed with a mini magnet.


The card base of Thick Whisper White card stock is 5 1/2 by 9 3/4 scored at 3 and 7 1/4". The top and bottom corners are rounded using Detailed Trio punch.

Two patterns of the DSP were used; the grid pattern on the top fold; the small flowers on the lower flap.  Both are matted with copper foil before being added to the card base.

A bit of tombo on the edges of the bottom flap and the flap is formed.

.A piece of Whisper White card stock 3 1/2 by  4 7/8",   for the written message, is inserted in this flap.  After taking this picture I added a tab to the top making it easier to access.

Decorating the top flap is a double flower, which has been adhered at an angle, with part of the flower extending over the end.  This flower is also coloured using inks and an aqua painter. Dazzling diamonds are added to the flower center. 

The grid paper below the fussy cut flower is sponged with Rich Razzelberry ink to create a bit more interest. 


The flap is kept closed with tiny magnets one of which you can see on the picture above.  You can also use velcro if you don't have magnets.

Two metallic design elements decorate the left upper flap.

I have not added any sentiments on this card as I wanted to leave my options open.


Card #3 - Another wallet card, but in blue



The fold on this card is the same as card #2, but the colour scheme is Bermada Bay and White with an accent of Copper.

Added to the edge of the top flap is some copper foil die cut with the Delicate Lace Die.

The DSP on the top has tiny copper foil flowers which were coloured with Bermuda Bay ink using a dauber.  Two large fussy cut flowers with their backs reinforced with circle card stock punchies are added to a Stitched So Sweetly die cut embossed with the Subtle Texture embossing folder.  The flowers, coloured with Bermuda Bay ink and an aqua painter, slightly overlap each other.



Some Bermuda Bay card stock embossed with the Layering Leaves Embossing Folder is added to the bottom flap. 

The card is also kept closed with mini magnets.

Again no sentiments.  They will be added later.


The corners of the insert are punched with the Detailed Trio Punch, rounded first, and then punched with that lovely floral pattern.  On the bottom is added a flower fussy cut from the edge of the DSP and a tab at the top.



Supplies Used:

Inks: Bermuda Bay, Old Olive, Daffodil Delight

Papers:  Thick Whisper White, Whisper White, Bermuda Bay, Flowering Foil DSP

Accessories:  Sweetly Stitched Dies, Delicate Lace Die, Subtle Texture Embossing Folder, Detailed Trio Punch, Circle tab punch, Layering Leaves Embossing Folder, Dazzling Diamonds, Aqua Painter, Mini Magnets







Tuesday, March 10, 2020

Tags in Bloom Fun Fold Shaker Card

The "Tags in Bloom" stamp set is one of the new SAB offerings as of March 3. It was used to make this fun fold shaker card. This card has a smaller card adhered to the center front of the card base.


Supplies Used:

Stamp:  Tags in Bloom

Inks:  Black Memento, Crumb Cake, Stampin' Dimensionals (Rococco Rose, Daffodil Delight, Crumb Cake, Old Olive)

Papers:

  • Rococco Rose 5 1/2 by 4 1/4" - card base
  • Rococco Rose 6 by 4 1/2" scored at 3" to make the small card 
  • Whisper White - 4 by 5 1/4" (2) - one for inside; one embossed with Layering Leaves embossing folder and layered on card base.  Die cut with Nature's Thought Die.
  • Whisper White 2 7/8 by 5 7/8" (2) - one for front of small card; one on inside
  • Whisper White 4 by 3" - stamp image for shaker unit
Accessories:
  • Layering Leaves embossing folder
  • Label Me Lovely punch
  • Window sheet 4 by 3"
  • Woven threads sequin assortment shaker elements
  • 1/2" Rococco Rose scallop linen ribbon
  • Champagne rhinestones
  • Nature's Thoughts Die
  • Foam adhesive strips
Putting the Card Together:

  • Emboss one piece of 4 by 5 1/4" piece of Whisper White with the Layered Leaf embossing folder.
  • Adhere to card front
  • Fold and score the 4 1/4 by 6" Roccoco Rose card stock to form a 3 by 4 1/4" card.
  • Die cut two pieces of Whisper White cardstock using the Nature's Thought Die.
  • On the 3 by 4" Whisper White card stock, stamp the tag image; stamp the flowers only on the bottom of the image.
  • Colour the flowers with Stampin' Blends.  Fussy cut the image.
  • Punch out the center using the "Label Me Lovely" punch.
  • Add window sheet to the wrong side.  Trim the window sheet around the image.
  • Add foam adhesive strips around the window sheet 
  • On one of the die cut 4 by 5 3/4 pieces of Whisper White, stamp the sentiment in Crumb Cake ink
  • Adhere to front of small card
  • Add sequins to middle of front, remove covers of adhesive strips and adhere to card front making the shaker.
  • add scallop roccocco ribbon below shaker and rhinestones to top right.
  • Stamp and colour 3 flowers to inside piece and adhere to inside of small card.
  • Adhere small card to card front using dimensionals.
  • Finish inside of card.



Sunday, February 16, 2020

Another Timeless Tropical card

This time instead of flowers, the focus is on palm trees.



When I think of the tropics I think of colourful sunrises and/or sunrises, so I attempted to mimic these in my card. Using a sponge brayer, the following colours were added to the sky: So Saffron,Daffodil Delight, Calypso Coral, Balmy Blue.

A strip of Tropical Oasis DSP featuring palm trees was added to the left side, and braided Linen trim as adhered along the edge. Note:  I did not place the trim ends under the card stock at their ends as this would make the card too bulky.  InThstead the trim was cut at the card stock edge and some ribbon fray solution was added to the ends to prevent fraying.  This solution can be obtained in any fabric supply store. Another strip of DSP looking like the beach  was adhered along the bottom.

The trees were stamped using markers - Old Olive on one tree and Mossy Meadow on the second and Early Espresso  on the trunks. and then die cut using the In the Tropics Dies.

The palm trees were added as shown on the card using small dimensionals some of which I cut in half. Grounding lines were added at the base.

The sentiment,, stamped in Early Espresso, was punched with the Label Me Lovely punch

Supplies Used:
Stamp: Timeless Tropical
Inks:  Sky:  So Saffron, Daffodil Delight, Calypso Coral, Balmy Blue         
           Trees:  Old Olive, Mossy Meadow, Early Espresso markers
           Sentiment:  Early Espresso
Papers:  Pear Pizzazz, Whisper White, Tropical Oasis DSP
Accessories:  Tropics dies, 5/16 braided linen trim, brayer, Label Me Lovely punch.